- Posts: 75
- Thank you received: 0
Log In
Log in
Pulling My Hair Out
- babromovage
- Topic Author
- Offline
- Junior Member
-
Less
More
14 years 9 months ago #6897
by babromovage
Pulling My Hair Out was created by babromovage
I have a tail light bulb our an cannot get the lens to release. I assume it is because of a gasket that may be very stuck to the lens cover. I do not want to take the rear bumper off to change a bulb. Anyone run into this before and have some ideas?
Please Log in or Create an account to join the conversation.
14 years 9 months ago #6898
by martinss
Replied by martinss on topic Pulling My Hair Out
I don't have the older style tail light so no personal experience - but you might find this thread on RL useful:
forums.rennlist.com/rennforums/928-forum...t-cover-removal.html
Good luck!
Good luck!
Please Log in or Create an account to join the conversation.
- the flying scotsman
- Offline
- Platinum Member
-
Less
More
- Posts: 721
- Thank you received: 0
14 years 9 months ago #6899
by the flying scotsman
Replied by the flying scotsman on topic Pulling My Hair Out
the owners manual depicts how the bulb is changed:
Please Log in or Create an account to join the conversation.
- babromovage
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 75
- Thank you received: 0
14 years 9 months ago #6900
by babromovage
Replied by babromovage on topic Pulling My Hair Out
Got it. Actually had to use a dent removing suction cup. The seal was like welded on. the divers side came right off with no problem.
Thanks
Thanks
Please Log in or Create an account to join the conversation.
14 years 9 months ago #6908
by martinss
Good tip IMO
Replied by martinss on topic Pulling My Hair Out
babromovage;7058 wrote: Got it. Actually had to use a dent removing suction cup...
Thanks
Good tip IMO
Please Log in or Create an account to join the conversation.